Order a copy of Ports & Passes and read thru it before you go. Calculating slack tides, highs, lows, etc is very relevant in the area
Ports and Passes
Ports and Passes
Dhays and HW have the general plans that seem to fit what you want. The only change I would suggest to Dhays' plan is not to double back to LaConner, rather make a loop by crossing the strait to Port Townsend and continue through the central and south sound then back north to LaConner via the south entrance of the channel. There is plenty to see and do in 4 weeks in the area from Olympia to Bellingham. It's not a small area.
An intrepid voyager, James Hamilton, took delivery of a new N52 and after commissioning did a run from Seattle to Prince William Sound. Offshore all the way...
How far and how fast is up to the OP. Everyone is different. And not everyone has a slow boat.
Also I saw some notes re 1:3 anchor scope. Seems low to me recommend 1:5. Anticipate you will need minimum 250 ft of rode.
Also. Explore taking delivery in Canada. Avoid 10% sales tax in Washington. Sidney a good choice. Note. If you bring boat into WA for 60 days without proof of sales tax paid somewhere it will be assessed on the current value of the vessel in WA.
Be sure you have a good windless and correct chain. Heavy load to life 150 ft of chain.I'd keep priority on the shake-down cruise goal, and stay in the more populated areas where supplies and services are more quickly obtainable. To me that means staying the Puget sound, the San Juans, and the Canadian Gulf Islands. There is tons to see in 4 weeks, so you won't get bored. And if you have any trouble, or need to tweak things or add things, it can be dome more easily and quickly than if you are further north.
I also like your idea of returning for 2-3 months later in the summer for some extended cruising. That would give you enough time to get well into BC and/or Alaska.
We switched boating from the East Coast to PNW a few years ago, and deep water anchoring was probably the oddest thing to get used to. Like you, I always tried for 5:1 scope, but deep water (50-100') that's just not practical, nor is it required. By the time you get 3:1 scope out in chain, you have so much chain weight hanging down that 3:1 works just fine. But it definitely took a while to get comfortable with only 3:1 since it's something you would never do in shallower water.
Another thing I suggest is that you make at least one night run on a calm clear night. Coming into Elliot Bay (Seattle) at night is very nice. If you don't do iton your boat take the ferry from Seattle to Winslow and back.
In April you will pretty much have the whole place to yourself. It's a nice time to cruise. We plan to start heading north then, so maybe we will cross paths.
Last weekend we had 60M of 10mm chain out, in 15M of water, in a fresh breeze. The Muir Cheetah (horizontal) had no trouble retrieving it and the Sarca, though the chain was surprisingly twisted. Surely you need around 200ft of chain, and some rope line on the end of that would be nice, just in case.Be sure you have a good windless and correct chain. Heavy load to life 150 ft of chain.
We locals call them tulip TWITS!So, getting back to cruising options and the time elements, having your car along is an added bonus.
When things go sideways for a day or four, you can easily escape the tulip tourists with a drive up to Whistler.
Do you have an idea of the drill when you get there? Will she have already been splashed and run around by NT? How much time they will spend with you?Bruce B Wifey D; said:For this cruise, getting the boat sorted out will be a top priority.
Do you have an idea of the drill when you get there? Will she have already been splashed and run around by NT? How much time they will spend with you?