Search results

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
  1. Endeavor GB 32

    Keypower stabilizers seal replacement

    Snapdragon, thanks for a very interesting post and tutorial. I am curious about your boat, years ago I spent months reading the cruising logs of a Skookum called Sea Raven online. Are you aware of that boat or blog, and, is your boat similar? Regards, Scott
  2. Endeavor GB 32

    1976 Marine Trader 36 Europa Sedan project boat

    Yes, I see it! Regards, Scott
  3. Endeavor GB 32

    Heater for a GB 36

    GB heat return air Caballero, If you install forced air heat on your 36, with the furnace in the engine room, no return air ducting is required. It could be done, however it would cause a buildup of humidity which would cause condensation problems. Ideally you want the furnace to intake outside...
  4. Endeavor GB 32

    Heater for a GB 36

    We have a 32 GB in Blaine, WA, it's our 4th GB in Puget Sound, all of which have had diesel heat. Current boat has a Webasto hot air furnace located in the lazarette, heat duct (+/- 4") runs forward outboard of starboard fuel tank, there is an outlet below the helm seat, one in the head, and one...
  5. Endeavor GB 32

    Stainless trim suggestions?

    I had a similar issue years ago with a 50 Fleming. It had an electric cooktop when I bought it and I converted to propane. The new cooktop was smaller and left big gaps. I got a local Corian fabricator to cut and install some pieces of Corian to get the opening size correct. I was fortunate that...
  6. Endeavor GB 32

    Raw Water Strainer

    When you say "seals," are they gaskets? Many years back we had a similar type strainer start to leak in the middle of a 3 week cruise in remote BC. When I dis-assembled it there were fiber gaskets at both ends of the glass cylinder, they tore upon di-assembly. I used an empty cereal box (Frosted...
Back
Top Bottom