holty
Veteran Member
So our new to us 2003 Pilot II 30 will be sitting in our driveway come this week. A frame will be made for shrink wrap with an entry so I can play inside over the winter. Lots of projects planned to make this girl our own. I will hook up a 30 amp circuit to connect to the shore power system so there are lights and receptacles inside. The oil will be changed before the haul and the Yanmar pickled after she is set up. I will disable the bilge pump float switches and add some pink stuff around the pumps that need it. The head, holding tank and AC system will get it's antifreeze as well. On our old rig I would add the pinks stuff to the fresh water system and run them until the pink is seen. A buddy is trying to convince me to blow out the fresh water system and water heater with a compressor so they won't have to be flushed in the spring. After flushing each spring on the old boat I would add a 1/2 gallon of vinegar into the system and let it slosh around a few days before flushing again. The vinegar really cleans out the scale within the pipes. This buddy insists all the water will leave the system with the compressor. I have the compressor and can go this route. What do you boys do? Also, any reason I can't leave the battery charger on all winter? Thanks for any tips.
regards Holty
regards Holty