Hello, I am looking for input on removing an original waste tank in a 34 CHB Trawler. I want to put in a purasan instead. Plus although unused and empty there are occasional odors. All hoses ate still in place to heads. I need to gut it all and start from hoses too.
The holding tank is in an awkward position underneath the foreward berth. It's fiberglass and looks to be permanently fixed to blocks, front and back of the tank.
There is minimal clearance above the tank, and it seems that if i cut the blocks with saws-all, maybe i can start cutting it out in chunks.
I can only access it from the bilge and a small floor opening. Hopefully the pictures in the link below help explain. I don't want to cut the floor open.
Has anyone taken on such a task? Any advice would help. Thanks, Sean
https://drive.google.com/folderview?id=1SI2Jx0b5NyIpQJw63_S9Whlih8s2OBOS
The holding tank is in an awkward position underneath the foreward berth. It's fiberglass and looks to be permanently fixed to blocks, front and back of the tank.
There is minimal clearance above the tank, and it seems that if i cut the blocks with saws-all, maybe i can start cutting it out in chunks.
I can only access it from the bilge and a small floor opening. Hopefully the pictures in the link below help explain. I don't want to cut the floor open.
Has anyone taken on such a task? Any advice would help. Thanks, Sean
https://drive.google.com/folderview?id=1SI2Jx0b5NyIpQJw63_S9Whlih8s2OBOS