- Joined
- Nov 8, 2012
- Messages
- 2,325
- Location
- Port Orchard, WA
- Vessel Name
- Sandpiper
- Vessel Make
- Bluewater 40 Pilothouse Trawler
Just received this from Furuno Dealer Support:
TZtouch3 v2.05 Software Update Available
November 3, 2021
Service Advisory #2021-06
TZtouch3 units have recently shipped from Furuno USA with v2.03 software. These MFDs can be mixed with existing 2.01 units without impact. This minor version change provides no noticeable difference, but was necessary to support a production change.
As of today, units will be shipped with version 2.05 software, which includes minor changes that don't allow for mixing with previous versions of software. These units cannot be downgraded to v2.01, so if you are installing a new TZtouch3 MFD into an existing TZtouch3 network, all MFDs on that network must be updated to v2.05. Most v2.01/2.03 users have little reason to upgrade to v2.05 unless adding one of these newer MFDs to their existing network.
Software, software history, and complete software update information can be found under the "software" tab of the TZtouch3 product pages. A pre-programmed software update kit is also available from Furuno USA for a nominal fee. Part number TZ3-SOF-USB
Warranty Allowance
This software update is provided at no charge to all NavNet TZtouch3 customers. Furuno USA's standard warranty and travel allowances are NOT applicable to this upgrade.
Dealers wishing to offer this upgrade as a service to their customers are authorized to charge whatever upgrade fee they deem reasonable for labor and materials.
If you have any questions, you may visit our website (www.FurunoUSA.com) and click on "Get Support" then "Ask a Question." You may also contact a Furuno support technician at either our Camas, WA facility, (360) 834-9300 or at our Denton, MD facility, (410) 479-4420.
Furuno USA, Inc.
TZtouch3 v2.05 Software Update Available
November 3, 2021
Service Advisory #2021-06
TZtouch3 units have recently shipped from Furuno USA with v2.03 software. These MFDs can be mixed with existing 2.01 units without impact. This minor version change provides no noticeable difference, but was necessary to support a production change.
As of today, units will be shipped with version 2.05 software, which includes minor changes that don't allow for mixing with previous versions of software. These units cannot be downgraded to v2.01, so if you are installing a new TZtouch3 MFD into an existing TZtouch3 network, all MFDs on that network must be updated to v2.05. Most v2.01/2.03 users have little reason to upgrade to v2.05 unless adding one of these newer MFDs to their existing network.
Software, software history, and complete software update information can be found under the "software" tab of the TZtouch3 product pages. A pre-programmed software update kit is also available from Furuno USA for a nominal fee. Part number TZ3-SOF-USB
Warranty Allowance
This software update is provided at no charge to all NavNet TZtouch3 customers. Furuno USA's standard warranty and travel allowances are NOT applicable to this upgrade.
Dealers wishing to offer this upgrade as a service to their customers are authorized to charge whatever upgrade fee they deem reasonable for labor and materials.
If you have any questions, you may visit our website (www.FurunoUSA.com) and click on "Get Support" then "Ask a Question." You may also contact a Furuno support technician at either our Camas, WA facility, (360) 834-9300 or at our Denton, MD facility, (410) 479-4420.
Furuno USA, Inc.