Pat T
Senior Member
- Joined
- Sep 6, 2019
- Messages
- 225
- Location
- United States
- Vessel Name
- Moondance
- Vessel Make
- Grand Banks CL 42
I tore out my old Grunert cold plate system. I am going to install a Frigoboat water cooled compressor ( Danfoss/Secop BD50) and evaporator in its place. The Frigoboat instructions call for a raw water pump with a strainer of 120 mesh. That seems pretty fine to me and it's proving difficult to find. At best I found only one strainer of 100 mesh. Just wondering if you have used this compressor and what your raw water is filtered to/mesh size.
Thanks.
Thanks.