Steve
Guru
During our last trip we tried using the propane stove top but the flow of gas to the burners was too low to keep them, even just one, at flame high enough to cook on. The safety gear seems to be working, the valve clicks on and off when tested. Today I removed the regulator and was surprised to find quite a bit, maybe 1/2 teaspoon of clear oil dripping out when I removed the fitting.
Searched online and found sometimes oil added to keep tanks from rusting inside may find it's way to the regulators and cause problems.Has anyone found that?
This tank was rarely used and has been in place for 8-10 years
The regulator, Pecimex mod 3001, seems to be a common one and I will replace it next week to see if that solves the problem.
Any suggestions or comments welcome.
Thanks!
Searched online and found sometimes oil added to keep tanks from rusting inside may find it's way to the regulators and cause problems.Has anyone found that?
This tank was rarely used and has been in place for 8-10 years
The regulator, Pecimex mod 3001, seems to be a common one and I will replace it next week to see if that solves the problem.
Any suggestions or comments welcome.
Thanks!