Mainship 390 - flybridge table bolted down?

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

Lshulan

Senior Member
Joined
Jan 10, 2022
Messages
156
Vessel Name
Voyager
Vessel Make
Mainship 390
I want to temporarily remove flybridge table to install faux teak and not sure if table is bolted down with nuts under floor and only accessible above headliner in salon. Anyone have first hand knowledge of this and is this is the case or might they be screwed down or possible bolted to a plate that itself is bolted thru floor? 2002 Mainship 390
 
Be aware, faux teak gets really hot. On summer day you cannot walk on it with bare feet. I have it and am removing off swim step but leaving the cockpit and stairs. I would not put it on the flybridge.
 
"Be aware, faux teak gets really hot. On summer day you cannot walk on it with bare feet."

Yes, I no idea where the OP lives but be aware it does get very hot underfoot.
 
We have gray SeaDek on all our decks and it isn’t bad as far as heat. When they templated our SeaDek they went around all the obstacles. I am surprised that you need to remove the table pedestal. Can’t you just lower the piece over the pedestal?
 
Back
Top Bottom