WMinder
Member
- Joined
- Apr 1, 2021
- Messages
- 18
- Vessel Name
- Rambling Rosie
- Vessel Make
- 2001 Mainship 390
At anchor north of Tampa. Started engine and alarm went off both on lower and upper helm. Had no indication of any problems when we anchored last night.
Both alarms are two wire set-ups. Same colors on both. One being purple w/green stripe, the other tan/lt brn? w/blue stripe.
Upstairs Helm alarm is small, round and mounted to the left of the single engine controls. Removed and the label indicates it is a AI-430 by Projects Unltd Inc out of Dayton. Ohio
Upon start-up oil pressure good, voltage good.
Looked up the diagrams in Mainship but don't find any color coding that matches this wire set-up.
Any suggestions as to the problem would be appreciated. I'm concerned about leaving and getting underway until a determination as to what is setting of the alarm.
I've taken pics of the wires and alarms but on don't know how to post them. Can send pics to an Email address if helpful. Have excellent cell service if you can call.
Thank You
Bill Minder
239-571-9646
Both alarms are two wire set-ups. Same colors on both. One being purple w/green stripe, the other tan/lt brn? w/blue stripe.
Upstairs Helm alarm is small, round and mounted to the left of the single engine controls. Removed and the label indicates it is a AI-430 by Projects Unltd Inc out of Dayton. Ohio
Upon start-up oil pressure good, voltage good.
Looked up the diagrams in Mainship but don't find any color coding that matches this wire set-up.
Any suggestions as to the problem would be appreciated. I'm concerned about leaving and getting underway until a determination as to what is setting of the alarm.
I've taken pics of the wires and alarms but on don't know how to post them. Can send pics to an Email address if helpful. Have excellent cell service if you can call.
Thank You
Bill Minder
239-571-9646