Aft Deck Capt
Senior Member
- Joined
- May 18, 2014
- Messages
- 191
- Location
- US
- Vessel Name
- Long Shot
- Vessel Make
- 1978 Californian 42' LRC
Well....here goes another project. I hope to have this back on the boat by the time the weather breaks for other dockside work.
I can't leave well enough alone and have decided to fab a sealed port light for the top door panel. Recently I came across round aluminum castings that can be machined into an exterior bezel and round, tempered, prismatic glass. I'm going to re-purpose some of the original teak fb rail for the interior bezel.
Here is the starting point. I'll post progress pics.
Q: Any other LRC owners in the same boat so to speak? I'll have a good shop drawing when done.
I can't leave well enough alone and have decided to fab a sealed port light for the top door panel. Recently I came across round aluminum castings that can be machined into an exterior bezel and round, tempered, prismatic glass. I'm going to re-purpose some of the original teak fb rail for the interior bezel.
Here is the starting point. I'll post progress pics.
Q: Any other LRC owners in the same boat so to speak? I'll have a good shop drawing when done.