long-cours.62
Guru
2006 Trawler/Explorer 650000 US$
Built in "Sealium" from Pechiney allloy 15% stronger than the 5086 or 5083
LOA 22.07 m
Hull L 21.135 m
Lflott. 19.30m
Beam maxi 5.90m (overall)
Hull Beam 5.80m
AIr draft with arch 7.70m ,
Air draft without arch 4.95 m
Draft light 1.60 m
Draft full loaded 1.80 m
Displacement light 47 T
Displacement full load 60 T
Water tank 2000 lt
Diesel tanks 9000 lt (able to made an Atlantic crossing, could be delivered every where, depending only ...covid restrictions )
Engine :
2 Caterpillar C12 705 cv 750 h 30/11/2021
ZF350 2,077/1
Caterpillar Multi-Station control System ICH
Aquadrive CV60 Aquadrive HDL700
Shaft seal ERCEM
Propeler 4 blade
Shaft inox 80mm
Side Power 90 liter hydraulique
2 Windlass hydraulique Maxwell 4000
Bowtrhuster Side Power SP550HYD
2hydraulic pump Sauer Danfoss JRL-060-B2
Stabilisateur Vetus (vérin 2021)
Gangway hydraulicOpacmare
Crane hydraulic OPACMARE 350kgs
Antifouled 09/2021
Trawler designed by Joubert/Nivelt for a project launched by a director of Alubat. The distribution of the arrangement brings it closer to the Selene 66 with more volume than the latter. Sélène/Trawler Joubert hull length 20.19/21.14 m, flotation 18.75/19.30 m, width5.69/5.90 m .With its very dense structure, supporting 8 mm Sealium plating, its reliable engines, large autonomy, this trawler would be a perfect support for "off-road" trips. Probably more in its true place in Alaska, Spitsbergen, Patagonia... Structure designed by Veritas Paris, plating certificates, welder certificates, welding control was all made by VERITAS.
Built in "Sealium" from Pechiney allloy 15% stronger than the 5086 or 5083
LOA 22.07 m
Hull L 21.135 m
Lflott. 19.30m
Beam maxi 5.90m (overall)
Hull Beam 5.80m
AIr draft with arch 7.70m ,
Air draft without arch 4.95 m
Draft light 1.60 m
Draft full loaded 1.80 m
Displacement light 47 T
Displacement full load 60 T
Water tank 2000 lt
Diesel tanks 9000 lt (able to made an Atlantic crossing, could be delivered every where, depending only ...covid restrictions )
Engine :
2 Caterpillar C12 705 cv 750 h 30/11/2021
ZF350 2,077/1
Caterpillar Multi-Station control System ICH
Aquadrive CV60 Aquadrive HDL700
Shaft seal ERCEM
Propeler 4 blade
Shaft inox 80mm
Side Power 90 liter hydraulique
2 Windlass hydraulique Maxwell 4000
Bowtrhuster Side Power SP550HYD
2hydraulic pump Sauer Danfoss JRL-060-B2
Stabilisateur Vetus (vérin 2021)
Gangway hydraulicOpacmare
Crane hydraulic OPACMARE 350kgs
Antifouled 09/2021
Trawler designed by Joubert/Nivelt for a project launched by a director of Alubat. The distribution of the arrangement brings it closer to the Selene 66 with more volume than the latter. Sélène/Trawler Joubert hull length 20.19/21.14 m, flotation 18.75/19.30 m, width5.69/5.90 m .With its very dense structure, supporting 8 mm Sealium plating, its reliable engines, large autonomy, this trawler would be a perfect support for "off-road" trips. Probably more in its true place in Alaska, Spitsbergen, Patagonia... Structure designed by Veritas Paris, plating certificates, welder certificates, welding control was all made by VERITAS.