rvolkwein
Member
Need to replace the rollers on the sliding door but am having a difficult time figuring out how to remove the door. I've removed the bottom strip and loosened the adjustment screws but cannot get the door out. Suggestions?
I got the aft door r/r but there is no way to remove the trim at the top of the helm door... there is not enough space to use a 90 deg screwdriver between the top trim and flybridge
...ok... bit u still would be able to get the door out without removing the top trim and u can't get to the screws which are probably corroded anyway (SS to aluminum)... there r plastic guide and friction blocks behind this trim that has a lower edge (lip) that prevent the door from being lowered past the trim... you can remove this trim on the aft door but NOT on the side helm door... I am just trying to locate someone that has successfully removed the helm door... my back door us done and yes i had to "force" it out of the track with a pry bar because the corroded wheel could not be retractes... whoever designed and decided to put this pitiful design on a boat was a lousy engineer
I'll try to answer following posts on a computer vs. my phone... between the touchscreen keyboard and word substitution the posts don't come out worded exactly right when the response us by cell phone