Search results

2 years ago I swapped all my ancient equipment to raymarine I installed 2 axiom +s, ev 400 , radar ,70s, raymarine sirius module , rs5, icom 510 ,etc etc The integration was seamless , the calibration was painless and if you update your lighthouse the autopilot will now follow your course...

There's no reason to bring guns into Canada Bring a hockey stick

The new competitor is the marco zeus Looks amazing!

Pretty good protection in Indian arm Bedwell will get a stiff breeze from the south east in the afternoon From twin islands to croker you get a 1ft/2ft chop Usually nothing stronger unless it's really blowing 2nd narrows current against wind can make for a little stress Best to pass or near...

Check the currents at the second narrows Especially if you are towing your dinghy About an hour to bedwell from coal harbour Take a dinghy ride into deep cove for dinner or for the doughnuts

Bedwell bay is a good anchorage ...can be busy Indian arm is deep! You'll need to stern tie if you want to anchor at the northern end behind croker island East Bay of Gambier is good anchorage ...roughly the same distance from vancouver Keats (plumper cove) is good , mooring buoys for boats...

I have a pair of the dreaded triple nickels and I use a pair of blue top optimas with 800 cold cranking amps to start (12 volt starters)them 3 years ... Start right up Knock on wood Engines purr along nicely

No genset!? A Honda portable I would consider a back up.is there a genset on board that doesn't work? Minimally a 8.5kw would be my preference or a ton of solar...

Check valves prevent it airlocking between the pump and the tanks and the pump always has water behind it to start pumping I re plumbed my boat in a not to dissimilar arrangement this year and I added a prime loop at the manifold and a drain off the manifold

You might want to put check valves just fwd of each tank

https://raymarine.custhelp.com/app/answers/detail/a_id/3353/~/what-versions-of-software-are-installed-within-my-raymarine-products%3F

I'd be happy to offer 400 cad which is 350usd for the 40 plus shipping Let me know if that works

Rotella t4 30w

I'll do both Depending on the circumstances I've put all new raymarine electronics on my boat and so I've been testing all the alarms Marpa , arpa etc Ais targeting And using those with anchor alarms Big learning curve But amazing when it all works

I leave the vhf on, on lower volume (channel 16) and I create a guard zone in my axiom, in a busier anchorage to alarm for boats entering too close but more importantly to alarm me if someone may try to set their anchor over mine

My triple nickels are paired with twin disc's 506s 30w or 40w dependent on temp I run 30w rotella

Try not pushing the key in On my 30hp when you push the key in the idle is changed ; mine won't start with the key pushed in and turned but starts every time when just turning the key

https://documentcloud.adobe.com/link/track?uri=urn:aaid:scds:US:823aad50-4209-42d4-a2a8-ada1fe04a153 Scanned the first 19 pages Will continue to update Hope it helps

I've got one on board Hard copy I'll send you a message next time I'm aboard

Fire away I'll answer what I can We are very happy with our atlantic

I believe that my hull above the waterline is airex cored , recently changed my foot switches out and the bow is 3 inches thick Unsure of what's going on under the waterline But recently went through some 10 ft seas for a couple hours I was freaked The boat didn't even shudder

I've got an atlantic 44 With twin cummins We love it Solid boat

Att is partnered with rogers so you'll be fine

There is a tower at sarah point and you can pretty much get lte to prideaux haven It gets sketchy in the Bays...like roscoe etc Squirrel cove has the best service All providers