Search results

The Ranger tug mentioned has been totalled by ins co. Will be auctioned where is in Middle River MD. Now it's not my style, but a cute little 27 ft tug. If anyone may be interested, I can give them the REAL SCOOP, how far down it went, pics etc. Not on their site yet, but www.cooperss.com

Mine on a 135 looks to be original, SS Off exh elbow to top of can, approx 12" diameter maybe 10 hi. Pipe lift center up to overhead, then to thru hull.

What state ? Laws differ, and "CONSTRUCTIVE". TL can be different.

Plenty alive & well at Walmart.

And BTW, if you do the install be sure the fwd corners of the top do not extend beyond the corners of the windscreen. You'll never get the big wrinkle out of the front enclosure

Marine Salvage Connection Ft Pierce FL

I'm coming into this late. If this happened to me wo any other resource, I would steam the tank. If put a wand into it connected to a clothes steamer and drain the tank, let it run. Or is there El Stanley steamer down there? When I was hauling chemicals, the final step in cleaning the SS...

So it's only 46 ft and a stern thruster (& prob bow thruster too) w the twin screw and he needs a 3rd rudder? No. He needs a paid Captain.

Tks. My Khoudung 30 has no such convenience. Very nice.

When you say "chase", is there a conduit in your bridge deck to the upper helm? My mast wires (3) have a plug that goes into a socket on the deck.

Dash mods pics Pics. (I hope)

Well, here's what I'm doing on Phelps. The upper helm on mine and many of these 30ft knock offs looks like this. I will never understand the logic of insetting the gauges centered and vertical. Anyway, Im putting seats on FG pedestals from a smaller boat IPO the benches. (The smaller of which...

27ft ranger tug selling at auction in Middle River md posted soon www.cooperss.com Took a partial bath, not all the way. No interest or affiliation

Getting ready to do radar. When your cable comes out of the mast , where is it routed after that ? Have not removed the mast yet, you mention. " cable raceway". Can I hope there is one under mine ?

Plenty of strap left. Slide it in a little & re-screw.

Scuse my stinkin' ignorance, but nobody has asked what boating experience you have. That may determine suggestions. If your experience is land based, you might be an Obi-wan mechanic, but boats require a different skill set.

Several bronze fittings I'm going to put on Marketplace. First shot for those on the forum. Marelon 1.5 " seacock $50 Thru hull/ seacock 3/4" with grill $60 (with complimentary bonding wire) Bronze T fitting 1.5" with plastic nipples $20 Bronze thru hull 1.25" (Wilcox) with check valve &...

Pull up anchor till it breaks the surface. Put in fwd. Check as deemed necessary & retrieve.

Ok. Don't know if a Danfoss, it's on a mini fridge. I'll plug it in & probe a little, tks

I can buy a 110v fan & wire it to come on with any compressor. But 12V fans are cheaper and require a temp switch to turn them on. Anybody got a satisfactory switch ?

Is that a 12v or 120v fan? If 12, what are you using for on/off ?

Start shifting assets, keep the boat

Buy commercially available curtains and have them hemmed to your length.

You guys all use what you want. Strata has a non scratch coating, not worth the $ to me. Zip to the top- I usually design my stuff to swing up to the top POCKET for the # 2 bow. Anything sewn or fastened to the top itself will create a leak from the pulling of the glass. I guess you could sew a...

To do just a couple of layers of Sunbrella, a home machine should do fine. Cut it with a hot cutter or a blade on a soldering iron, no need to hem.