Tidahapah
Guru
- Joined
- Oct 7, 2007
- Messages
- 1,859
- Location
- Australia
- Vessel Name
- Flora
- Vessel Make
- Timber southern cray boat
Guys,
I don't know how this will transpire but over Easter the Boss and I delivered Tidahapah down to the Gold Coast City Marina.
My intention is to possibly do the following.
Convert my flopper stopper system into a full paravane system.
I have renewed the arms and have a couple of sets of fish to try out and modify as required. These are all yet to be fitted.
This process will require the fitting of either an aft mast and if so a main mast with furler.
Or a small set of gallows to carry the paravanes.
Still working on the mast set up.
Redo some cosmetic fiberglass work around the wheelhouse roof.
Sand and paint the hull topsides. Timber boat so it will be done as usual with International Interlac gloss white.
Fit a new Bow roller to better suit my Sarca Excel. see attached photo.
Over in WA working at present so should be back to continue about mid May.
I don't know how this will transpire but over Easter the Boss and I delivered Tidahapah down to the Gold Coast City Marina.
My intention is to possibly do the following.
Convert my flopper stopper system into a full paravane system.
I have renewed the arms and have a couple of sets of fish to try out and modify as required. These are all yet to be fitted.
This process will require the fitting of either an aft mast and if so a main mast with furler.
Or a small set of gallows to carry the paravanes.
Still working on the mast set up.
Redo some cosmetic fiberglass work around the wheelhouse roof.
Sand and paint the hull topsides. Timber boat so it will be done as usual with International Interlac gloss white.
Fit a new Bow roller to better suit my Sarca Excel. see attached photo.
Over in WA working at present so should be back to continue about mid May.