jwag956
Veteran Member
Starting to try to figure out a leak (alas we have 2). This one is in the forward V-berth window. Yes, tracks have been cleaned, drain/weep hole clean, and in fact when it's leaking, there isn't much of any water in the track at all - so likely coming from somewhere higher up. Outside, caulk around windows 'looks' good. This is a 89 GB42 (So I think that means aluminum window frames).
Thanks to great advice here on TF, I got the teak bungs out (forstner bit and picks) and the screws thankfully came out easily.
But then - the trim doesn't budge - with the pick it is clear that at least at the window frame edges there is caulk/adhesive.
So - question is - anyone with experience in how to get the bottom teak board off w/o damaging things? Picture attached.
TIA
Thanks to great advice here on TF, I got the teak bungs out (forstner bit and picks) and the screws thankfully came out easily.
But then - the trim doesn't budge - with the pick it is clear that at least at the window frame edges there is caulk/adhesive.
So - question is - anyone with experience in how to get the bottom teak board off w/o damaging things? Picture attached.
TIA