Bel
Veteran Member
- Joined
- Nov 28, 2020
- Messages
- 27
- Vessel Name
- Sea Jac
- Vessel Make
- Davies 54
Hi from New Zealand.
Our 54 ft Taiwanese trader has had new blackwater tank and sensors fitted when the heads were replaced about 18 months ago with the previous owner but it keeps giving us strange readings, and saying the tank is full meaning the heads are unable to be flushed.
So we left the boat last week and it was reading 35% full, and came back 4 days later abd it’s reading 98% full (and not allowing any flushing).
And a couple of weeks ago we emptied the tanks completely, and within an hour its reading 25% full but nothing had been used.?
We have had the tank cleaned, sensor checked and calibrated just before Christmas so I am at a loss to explain whats going on.
Any advice would be appreciated as this is causing us grief.
Our 54 ft Taiwanese trader has had new blackwater tank and sensors fitted when the heads were replaced about 18 months ago with the previous owner but it keeps giving us strange readings, and saying the tank is full meaning the heads are unable to be flushed.
So we left the boat last week and it was reading 35% full, and came back 4 days later abd it’s reading 98% full (and not allowing any flushing).
And a couple of weeks ago we emptied the tanks completely, and within an hour its reading 25% full but nothing had been used.?
We have had the tank cleaned, sensor checked and calibrated just before Christmas so I am at a loss to explain whats going on.
Any advice would be appreciated as this is causing us grief.