Mainship Engine Room/Bilge Lights

[Heap]

I have four engine room lights that have two pin halogen bulbs that are huge watt suckers. Two of them are burned out. Has anyone replaced these bulbs? With the original halogen? With LEDs?

 

[Mac2]

I replaced mine with LED. They have worked fine for 4 years now. The only issue I have is that the LED bulbs are bigger and tend to slowly work their way out. Mine hang vertically. Maybe once a year I have to push them back up. I have considered putting a little superglue on one of the pins to help hold it in place, but it's really a non issue. Mine were power with 12v. I have replaced other MH with LED's. My boat has numerous 110v headliner lights. I had to replace the driver/transformers for these. I've had to replace the drivers because I went cheap. They lasted several months and then the lights started going out intermittently.

 

[JFisher]

I replaced my ER / Bilge lights with LEDs in my Pilot 34. Found them on Amazon.
Ukey U GY6.35 LED, led Halogen Replacement 5W Bi-pin Base 12V AC/DC 2700K Warm White Dimmable,led Landscape Light Bulbs 50W Replacement 5Pack

 

[keith c]

replaced mine with LEDs.Amps went from 12 amps to less than 1 amp!

 

[lwarden]

I replaced my older fluorescent fixtures in the engine room with these and couldn't be happier. They aren't that much more cost than the LED bulbs.

https://www.amazon.com/gp/product/B07VXSV669/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

 

[Newtrawlerowner]

Engine Room LED Bulbs

I have four engine room lights that have two pin halogen bulbs that are huge watt suckers. Two of them are burned out. Has anyone replaced these bulbs? With the original halogen? With LEDs?

This is what I used on my MS400. They worked great.
https://www.amazon.com/dp/B07SN8342...olid=3T3O9MXMB9YM0&psc=1&ref_=lv_ov_lig_dp_it

 

[Bacchus]

LEDs are available inbG4 base (2 pins),which is what my MS ER & interior lights were. Several different disc sizes, lumen ans color/ temps available. Very happy as amp draw in ER went from about 20A to 2-3A

 

[CaptBud]

Fisheries has two pin LED's they work greatl

 

[ssurabus]

If it's an 40T, don't forget that there is a 5th light in the generator area. The part number for the LED bulbs I used is no longer available, but I can definately say that changing to LED for those lights is a good move - especially if you end up having to change the fresh water pump at 2AM. The original bulb right next to it throws out a LOT of heat! That turned into a sweaty job.