Iggy
Guru
Need a little help.
My Pacific Trawler is 20 years old with a simple voltage and amp meters. Last year I installed a simple 300 watt solar system with a Victron controller. Now I am installing a Victron Battery Smart Shunt that will tell me rate of charge and discharge. It would be nice to know my battery level! Plus a Victron Cerbo GX which is a I/O device that can connect these device and more to display and change settings on my GPS. Connecting the 2 Victron units and the GPS is straight forward with a little reading.
I already have Magnum 3000 watt charger/inverter that has a Can connector. There calling it a RV-C connector. On the Victron side they have a VE.Can and a BMS-Can. I am not finding any info on connecting the 2 to display the inverter info. Has anyone done this?
My Pacific Trawler is 20 years old with a simple voltage and amp meters. Last year I installed a simple 300 watt solar system with a Victron controller. Now I am installing a Victron Battery Smart Shunt that will tell me rate of charge and discharge. It would be nice to know my battery level! Plus a Victron Cerbo GX which is a I/O device that can connect these device and more to display and change settings on my GPS. Connecting the 2 Victron units and the GPS is straight forward with a little reading.
I already have Magnum 3000 watt charger/inverter that has a Can connector. There calling it a RV-C connector. On the Victron side they have a VE.Can and a BMS-Can. I am not finding any info on connecting the 2 to display the inverter info. Has anyone done this?