Hello from the sunny Gold Coast

The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.

FreeSpiritSue

Veteran Member
Joined
Jun 27, 2019
Messages
26
Location
Australia
Hi everyone. I bought a Cuddles cabin cruiser a few weeks ago. I’ve been researching trying to find more information and came across this site. There’s been a few issues - one of the diesel tanks has a leak. It’s now switched off but when I go to bed I smell diesel! I can’t find the plumbing, electrical plan etc of this boat anywhere (not that i’d Know what to do with it?) any suggestions on how to find the leak or temporarily cover the inboard tank would be greatly appreciated. Thanks
 
Hi Sue, and welcome to TF. You'll find it a great boating fraternity, with much good advice and experience. Although our last boat was a Clipper 34, some years prior to that we have a Cuddles 35. Do you have the 30 or 35..? They are similar anyway, one just being the bigger version of the other. Still the most space efficient design out there, in my view. Our 35 could actually bunk 10 adults.

The leaky fuel tank is a concern, and I'm afraid you'd best obtain some professional help re that I think. Being common to Moreton Bay, most marine repair shops are familiar with the design. Where do you have it moored. I might be able ot even recommend someone to look at it for you.

Also, Auscan is a fellow Aussie based in Adelaide who has a motor sailer version of the Cuddles 30, and might well have some helpful advice for you. I'll PM him and alert him to your presence on here and your issue.
 

Attachments

  • IMG_0211.jpg
    IMG_0211.jpg
    120.1 KB · Views: 69
  • IMG_0212.jpg
    IMG_0212.jpg
    123.7 KB · Views: 74
Hi Peter
Thanks for your reply. Yes, you’re right, I do need a diesel engineer. The one I used years ago when I had a houseboat is busy at the moment. My Cuddles is a 30’. It’s perfect for me. I bought it as is, where is, at Horizon Shores. The plan was to go out on anchor in the Broadwater but due to the issues, i’m lucky to have friends whose jetty i’m Moored at in Biggera Waters. The boat was geared to 240v & i’ve Had that changed to solar & 12v.
The seating contains old eutectic fridge in one & freezer in the other. What’s your thoughts of using this method on the 2x260v agm batteries? I’n Looking forward to being part of this community. Cheers
 
My Cuddles is a 30’. It’s perfect for me. I bought it as is, where is, at Horizon Shores....The seating contains old eutectic fridge in one & freezer in the other. What’s your thoughts of using this method on the 2x260v agm batteries? I’n Looking forward to being part of this community. Cheers

Sue, with a decent panel area, and those batts, (I think you meant 260 amp.hour), enough solar should allow running the under-seat fridge and freezer. Ours was set up similarly. However, the freezer might be the biggest drain, so adding in more panels might be a goer if you have the sedan without flybridge - if flybridge then not so much panel area to use, so modest petrol genny might be the way to go.

Actually if you just use bags of ice in the freezer adding it to cool space, often a freezer can be done without in Moreton Bay, with amenities so close. My Clipper, (which was also at Horizon Shores incidentally), had a couple of modest panels, which struggled, so I added an Airbreeze wind genny. But in retrospect, a Honda type 2kW genny suitably placed bearing in mind exhaust safety, would be a better alternative, as works in all weathers and all anchorages.

For the tank issue I can recommend Troy at Wandell Road Marine 0447 648 030‬.
Cheers,
 

Attachments

  • IMG_0073.JPG
    IMG_0073.JPG
    78.5 KB · Views: 78
Hi Peter. Thanks for the excellent advice. I phoned Troy & he’s a bit busy at the moment but I will contact him when I get back from Tassie. I found someone who fixed the bilge (the pipe was disconnected) & he also put in an automatic one. He was here for 11/2hrs & charged $80. Cant recommend him highly enough.
You’re right, I don’t really need a freezer. The solar electrician advised not use eutectic from a power point of view & suggested a Waeco. I’m taking my time to work out what’s best as space is limited. Thanks for your help. Have a great day.
 
Welcome aboard! Hope you find the fuel leak, are you sure it`s a tank leaking, not a hose or a connection?
 
Welcome aboard. Good luck with your new boat.
 
Thanks Bruce. Very happy to be here. No, I’m not entirely sure as it was a vague assessment from the mechanic.
I’ve been reading lots of your posts in relation to eutectic refrigeration. My electrician advised against it as i’m only working from solar panels, batteries & inverter. I have a fridge in one seating area & freezer in the other bi don’t really need a freezer (just won’t be able to give the grandkids ice cream?) The boat is a 1981 Cuddles cabin cruiser with a flybridge. It seems a waste not to utilise the space. I would need to covert it to 12v & i’m Not sure how good the insulation is. What would you recommend? Thanks.
 
Sue, you are right to look into the Waeco option and just go 12v. When the eutectic on my Clipper died beyond resuscitation I just kept the large freezer in the cockpit as a huge ice-box, and as the fridge inside was so well-insulated and roomy I converted it by a Waeco Cold-pack, (as they called it then), to 12v, and it was great. I had a lot of fun doing it as well. You might be able to convert the one under the cockpit seating to 12v, but as that position is fairly inconvenient, in your case a purpose built 12v boat fridge might be worth the spend..?

Here's how mine looked in the end...
 

Attachments

  • IMG_0067.JPG
    IMG_0067.JPG
    115.7 KB · Views: 54
  • IMG_0296.jpg
    IMG_0296.jpg
    146.7 KB · Views: 64
  • IMG_0309.jpg
    IMG_0309.jpg
    142 KB · Views: 64
Sue, Peter is giving you good advice. The joy of eutectic systems is the fridge and or freezer is not a load on batteries but, it requires substantial amounts of 240v power twice a day when away from the marina,meaning a genset is required. If you can meet your needs without one,do. Alternatively, there are engine driven compressors for eutectic systems, I`m told way faster than electric compressors, but according to the people I asked about fitting one, cost about $5K and can give trouble. Add that to the cost of cold plate cabinets etc, you are better working with what you have,as Peter suggests.
 
Hi Sue, Welcome aboard from another Gold Coaster. I am berthed at Hope Island. I have eutectic fridge and freezer, they work very well and only 19 yrs old. If my fridge died I would probably replace with a 12 v/230 V fridge.If you are opening and closing eutectic doors you will need to run generator about 3to 4 hrs a day if the same as mine.
 
Hi Auskiwi. Thanks for the welcome. I’m not too keen to run a generator. After reading lots of threads I might go like you would, with a 12v fridge. Cheers. Sue
 
Hi everyone. I bought a Cuddles cabin cruiser a few weeks ago. I’ve been researching trying to find more information and came across this site. There’s been a few issues - one of the diesel tanks has a leak. It’s now switched off but when I go to bed I smell diesel! I can’t find the plumbing, electrical plan etc of this boat anywhere (not that i’d Know what to do with it?) any suggestions on how to find the leak or temporarily cover the inboard tank would be greatly appreciated. Thanks
Hey Sue,

Welcome to the TF. As you can already see, there is lots of knowledge on this forum. They helped me solve the problem with my Vacuflush. Saved me from having to replace major parts. Turned out all we needed was a vacuum pump for $50. Problem solved. [emoji3]
 
Welcome Sue,
Nice to have another Cuddles owner on board!

Tell me a bit about your fuel tanks. Are they made from stainless steel or fibreglass? What size are they?

My original tanks were made from stainless steel and located on either side of the engine. The design was not ideal, as they did not allow for air circulation under the tanks and it would remain damp. They corroded on the bottom of the tank and eventually diesel started to seep out into the bilge.

If your problem is the same, you'd find that if you put paper towel or cardboard along the base of the fuel tank, it will dampen with diesel starting where it is seeping from.

If you are lucky, it could be a loose fitting at the fuel tank outlet or filler. If the tank itself is corroded it a bigger job to repair or replace.

In regard, to the refrigeration, I also have the two insulated areas under the cockpit seating. Mine aren't refrigerated, but I line the bottom of one with frozen water jugs or blocks of ice and it keeps drinks cold for up to a week depending on the weather. I use a portable 12 volt Waeco fridge/freezer to refreeze the ice jugs as required.
 
Hi Auscan. Wow! That’s amazing advice. Thank you! Yes, my fuel tanks are on either side of the engine & are stainless steel. The bilge has a mixture of diesel & oil. Had it cleaned out. I sleep in the midship bed & at night can smell it. Though it’s not as bad since it was cleaned. The inside of the Hull was cleaned too as there was a layer of black gunk.
I had the boat sandblasted, epoxied & anti fouled. I love the boat.
I love what you did with the refrigeration. That would definitely suit me. Do you keep the Waeco in the cockpit? A friend loaned me an ice chest & I have it at the helm but I had to take the seat off. It’s ok now whilst i’m On a friend’s jetty fixing things but eventually i’ll Be going out on anchor. Cheers. Sue
 

Latest posts

Back
Top Bottom