Fuel Polishing In OBA
- Thread starter kartracer
- Start date
The friendliest place on the web for anyone who enjoys boating.
If you have answers, please help by responding to the unanswered posts.
If you have answers, please help by responding to the unanswered posts.
Rogerh
Guru
- Joined
- Aug 27, 2013
- Messages
- 724
- Location
- USA
- Vessel Name
- At Last
- Vessel Make
- 1990 Jefferson 52 Marquessa
Have you talked to Saunders yet. They are the next marina/service center further east from Home Port. I expect they have the capability but I don't think they would be cheap. May be worth a call to them.
kartracer
Guru
- Joined
- Aug 5, 2014
- Messages
- 529
- Location
- USA
- Vessel Name
- M/V LUNASEA
- Vessel Make
- 45ft Bluewater Coastal
Thanks Rogerh and Capt.Jon Sauders bought out Moore's and they are looking at the project. Surprised they are the only one in the area that does this. Salty Dog repair has 3 other boats (in and out boards) doing the same as mine, will run at 1000 -1100 RPM only, all need fuel cleaning.
To all with gas engines, it seems that even when they say "no ethanol" gas there is a small percentage still there. This small percentage is loosening all the build up and junk in the tanks and causing clogging problems in the pick up lines in the tank.
To all with gas engines, it seems that even when they say "no ethanol" gas there is a small percentage still there. This small percentage is loosening all the build up and junk in the tanks and causing clogging problems in the pick up lines in the tank.
