Liambennett
Veteran Member
- Joined
- Apr 25, 2023
- Messages
- 45
Hi all,
About to start the commissioning of a new Cummins VT555m.
I have two 1000L wing tanks of fresh water.
As the boat may sit for long periods between use I was considering installing a fresh water flush system. Using the tank water as a water source as it will empty the tanks to avoid water sitting in the tanks ( killing 2 birds with one stone )
Was thinking of using a 1 inch hose from each tank plumed into a tee prior to the pump, with ball valves isolating each tank. ( All bronze )
Thoughts ?
About to start the commissioning of a new Cummins VT555m.
I have two 1000L wing tanks of fresh water.
As the boat may sit for long periods between use I was considering installing a fresh water flush system. Using the tank water as a water source as it will empty the tanks to avoid water sitting in the tanks ( killing 2 birds with one stone )
Was thinking of using a 1 inch hose from each tank plumed into a tee prior to the pump, with ball valves isolating each tank. ( All bronze )
Thoughts ?