Knot Salted
Senior Member
- Joined
- Mar 16, 2015
- Messages
- 329
- Location
- USA
- Vessel Name
- Knot Salted
- Vessel Make
- 1981 Californian 34 LRC
1981 34LRC
As far as I can tell, struts are original, with 1 1/4 shafts.
What size Cutlass bearings were used please?
Boat is in the water, and I had decided to replace them next fall/winter.
Upon launch yesterday, the handlers goofed and ran the strap under the shafts. While not load bearing on this trailer, the strap tension was enough to result in “flexed” shafts, and new vibrations.
Since we will be pulling shafts in a couple of weeks, I’d like to get the bearings on-hand to minimize loss of water time.
Thank you!
As far as I can tell, struts are original, with 1 1/4 shafts.
What size Cutlass bearings were used please?
Boat is in the water, and I had decided to replace them next fall/winter.
Upon launch yesterday, the handlers goofed and ran the strap under the shafts. While not load bearing on this trailer, the strap tension was enough to result in “flexed” shafts, and new vibrations.
Since we will be pulling shafts in a couple of weeks, I’d like to get the bearings on-hand to minimize loss of water time.
Thank you!
Last edited:
