Search results

I did. They don't list it and I called and no luck there.

Having no luck finding replacement prop nuts from my 1997 Offshore 58. They are Metric M48-4.0. Need a set of Left and Right thread. Anyone know where to get them?

Conclusion: The heat exchanger was cleaned. Oil filter was recently changed. Confirmed that when the breaker for the stabilizer is on that the system pressures up which means in standby or engaged mode the pressure relief is in play and will heat up the oil. Did a 10-hour run a few days ago with...

All of this feedback has been great and helped. Very much appreciated. I have now flushed the unit with barnacle buster and it was clearly dirty. We will have to wait and see if that helps. Doing more digging and found the following. There is a relief valve that bleeds the pressure back to the...

Pump is a PTO off engine so run and moves fluid whenever the engine is running. At this point I am thinking I should pull the cooler out and ensure it is clean and not plugged restricting the cooling. There is little else in the system so really no idea what else to look at.

Item 9 is the pressure relief. I believe that when engine is running fluid is pumping all the time and every now and then the spools allow flow when moving the fins. Otherwise, 9 is the pressure relief that keeps the system at 750PSI.

I have a Wesmar/Hydraulic–Fins/RS-400 stabilizer and it overheats (Tank gets to 150F after 1.5 hours) when I cruise with the system in disabled mode. If I cruise with it enabled for the same amount of time system only gets to 122F and says there. Cooling water flow through heat exchanger looks...