Search results

Will do, probably going to tackle that project over the winter. Will let you know the results.

Turtle Blues, did you try the newer assembly in your searchlight? I have the 12v version, 61040. Can only find the new assembly for a 62040. Last effort before just replacing the searchlight.

when key switch is activated the gauges jump to full and stay there. I have taken the sender and ground wires off and jumped those two with a 110 ohm resister and the gauge reads about where it should so I assume the gauge is working properly. Think diver dave may be on to the root of the...

Tanks are grounded and from what I remember yes on the active galvanic system. Will remove and clean green wire (grounding system) from each tank, clean and make sure they are making good contact. The black negative on the tank sender has been removed, cleaned and making good contact. When I...

Will check voltage when getting back to the boat. I did a voltage check on a chart plotter also located on the flybridge and got a reading of 13.6 volts. Will check at the gauge, but the fuel gauges share not only a common ground with other gauges but also power, with the other gauges working...

Trying to determine the cause of my fuel gauges going to full and staying there when key is turned on. Checked ohms at the tank and seems correct. Checked ohms at fuel gauge before turning key switch on which matches reading at the tanks. Once key is turned on gauges jump to full, although I...

Thank you, very helpful.

Would anyone know what the ohm range should be for the saddle tanks on a 1990 Californian 45 MY? And/or know the brand/Mfg of the sender? Thanks RH

Has anyone removed or serviced the air handler located on the flybridge? This is a split unit that services the salon, compressor in engine room, air handler on flybridge. I cannot figure out how to get the cover off without tearing up some stuff which I am trying to avoid. The air handler is...

Captain Richard Hughes (727) 254-1333 Awesome, great communication. He and Captain Ed who works along side him were fantastic. He just completed a delivery for me on a 45 Californian. During handoff went thru all the systems and things they found. Then after handoff called twice a day...

Thank you. Mine is CDRFB006D989. I have the date of mfg covered, just looking to see what other info I can pull out of the HIN. Thank you Roy

Is there a site where I can put a Californian Hull ID to find out where it was built and the model? I have the date built figured out, just looking for other information included in the HIN. Search this site but could nt come up with that info.