Search results

I have a 2:1 or might be a 2.1:1 Velvet Drive that was a rebuilt spare. If your interested I'll post the exact model #. PM me for a price.

Please send or post a picture of the part needed and I'll take a look.

Boat has sold, congratulations to the new owner. Thanks for all interest. Josh

Update, reduced asking price to $18,000. Fresh bottom paint and zinc, exterior teak has been cleaned and oiled in May. Boat is in the water and ready for sea trails, come take a look. Currently located in Trappe, Maryland at Ferry Point Marina. Slip is paid thru November 2020 and is...

Sorry for the delay answering. Brightside was done fall-winter of 2016. Matterhorn White is holding up well, everything was primed first with a 2-part epoxy, Interprotect 2000e. The red boot stripe did not adhere well at the boot strip (starting to peel in some locations) and will be redone...

Still available, come take a look.

Here are some additional pictures.

Sorry, I forgot to list the location. The boat is located on a tributary of the Chesapeake Bay, Choptank River in Trappe Md.

Asking $23,900, open to reasonable offers. I have been renovating this boat to make it seaworthy and have greatly enjoyed the process. All mechanical systems have been rebuilt or restored. Boat is completely functional and can be cruised today. A complete log, from 2016 thru current, will...

Yes

I went thru this exact repair 2 winters ago. Your stern bearing housing appears similar. Good luck on the repairs, it's was a pretty straightforward task, for me. I hope yours is similar. http://www.trawlerforum.com/forums/showthread.php?t=38071

See pictures.

I still have the one pictured in an earlier post.

I have 12 valve adjustment screws from the 2725e engine and 4 bleed off screws from the 2711e engine.

Not sure if this will help, but found on local craigslist. https://easternshore.craigslist.org/bpo/d/rock-point-grand-banks-trawler-parts/6814772676.html

Sorry, no alternator.

I have one for each engine. The one for the 4 cylinder is missing the dust cap and the handle is broken, see pictures.

Here are some pics of items requested.

Here are pics of the CAV fuel filter assembly. Note, both bleed screws are missing.

I have assorted parts for a 6 cylinder Ford Lehman 2725e that are available. I also have assorted parts for a 4 cylinder Ford Lehman 2711e that are available. All parts are used, let me know what you need and make an offer if I have what you need. I also have a running (2 years ago) Ford...

Here is one on Craigslist on the eastern shore of Virginia. https://easternshore.craigslist.org/boa/d/nimble-nomad-trawler-trailer/6720648911.html

More progress pictures. New shaft log install completed. Now to start putting everything else back together that was removed for this task.

Update, received the replacement shaft log tubing from the machine shop that threaded one end to match the metric threads in the stern bearing casting.

The skeg was replaced/sistered on the bottom with some 3" box tubing. The broken fiberglass skeg was glassed over. The exposed section of broken skeg was a combination of plywood and lots of fiberglass. I don't if it was original construction as there was evidence of prior repairs. I also...

I had pretty good steerage in one direction only. Was able to return to Cape Charles unassisted, it was a white knuckle experiance. As far as the rudder post being bent, the yard was able to cut off the damaged/bent part and weld a coupling flange on. That makes the redesigned rudder...