sean9c

The changes to the original BR design were made by an NA to try and somewhat compensate for the diversions made, like the large steel...

What?!

I've ZF Microcommander and think it's fine. IMO, the problem now with ZF is their lack of factory authorized service centers. Luckily...

Just think, before we decided we needed all these electronics in order to go boating you'd have a compass, a chart, maybe a RDF and if...

I've a friend with a 36ft lobster yacht that's 15ft wide, he has to look for 50ft slips because of that beam. At that point you might as...

I'll propose a different theory. The steering pump has check valves that pop off when you turn that direction, but close otherwise. If...

I'd guess it was also weak before watering and is toast. Adding water won't make a battery weak. If you had to add a lot of water maybe...

Pumps vibrate, it's always a good idea to a short piece of hose between the pump and your hard line

You can use the Octopus pump. You need to make sure that it does have sufficient output. What they normally look for is can the helm go...

The Behr is house paint. None are even remotely equivalent to gelcoat

A friend of mine was interested in the Sea Piper and had come up to look at the one being built for the customer in FL, I think it's the...

You don't need any cutting fluid or anything like that. it'll just make a mess. Fiberglass dust might make your skin itch, if you're...

Those things don't have much torque, that's how they keep them small. It'd likely have enough power for your small holesaw but nowhere...

That hole saw you pictured would, I'm sure, work great in fiberglass but it's also a lot more expensive than a steel one and since it's...

Years ago I helped a friend pull up the rotten deck on his TT. We also found that the wood was in layers and concluded that it was...