Sababa

I’ve spoken to the Commodore and they are going to let me do the test off the 50 amp connection either at my own slip or at the...

Notwithstanding what Marinco says, Miguel insists that he has had other club members successfully use the reverse Y adapters with the...

I don't know why the 30A single doesn't work. I'm assuming it has something to do with the isolation transformer but would appreciate...

Unless the web site is wrong they only have 30 amp at the reciprocal dock. https://www.queencity.org/reciprocal-visiting-boats

I just got through to Marinco technical support and they have confirmed that this is the correct answer. You cannot use a reverse Y...

I misunderstood what you wrote. What tiltrider said.

My boat is set up the same as yours and I’ve never had a problem using the splitter with 30A power in the same way as you until I...

:ROFLMAO::ROFLMAO::ROFLMAO:

At ten bucks a pair for these you really need to be in search of a hobby to splice and whip your own fender lines...

He is a marine surveyor.

I’m surprised the guy they hired to do the inspection didn’t know that the reverse Y was a non-starter. What a waste of time if so.

Good suggestion, I’m going to reach out to the contractor. They do have 50 amp protected pedestals in some of the bigger slips and at...

The reverse splitter circuitry needs power to both inputs before it will supply power to the output. I have a single 30 to 50 pigtail...

So what folks are saying is that reverse splitters just don’t work with GFCI and there is nothing wrong with my boat? Anything...

My shore cable is four wire 125/250v 50A. The splitter is two 3 prong 125v 30A to single four wire inlet...